DJGPGP,DJGP1G ，DJGP1GP1， DJGGP2， DJGP2GP2 ，DJGP2G ，DJGPG耐高溫硅橡膠計算機軟電纜

DJGP1G硅橡膠絕緣和護套鍍錫銅絲編織分屏蔽耐高溫防腐計算機軟電纜

DJGP2G硅橡膠絕緣和護套銅帶纏繞分屏蔽耐高溫防腐計算機軟電纜
DJGP2GP2硅橡膠絕緣和護套銅帶纏繞分屏蔽總屏蔽耐高溫防腐計算機軟電纜

DJGGP 硅橡膠絕緣和護套銅絲編織總屏蔽耐高溫防腐計算機軟電纜
DJGPG硅橡膠絕緣和護套銅絲編織分屏蔽耐高溫防腐計算機軟電纜
DJGPGP硅橡膠絕緣和護套銅絲編織分屏總屏蔽耐高溫防腐計算機軟電纜
DJGGP1硅橡膠絕緣和護套鍍錫銅絲編織總屏蔽耐高溫防腐計算機電纜
DJGP1G硅橡膠絕緣和護套鍍錫銅絲編織分屏蔽耐高溫防腐計算機軟電纜
DJGP1GP1硅橡膠絕緣和護套鍍錫銅絲編織分屏蔽總屏蔽耐高溫防腐計算機軟電纜
DJGGP2硅橡膠絕緣和護套銅帶纏繞總屏蔽耐高溫防腐計算機軟電纜

關鍵詞：DJGPGP,DJGP1G DJGP1GP1 DJGGP2 DJGP2GP2 DJGP2G DJGPG硅橡膠計算機電纜，

DJGPGP,DJGP1G DJGP1GP1 DJGGP2 DJGP2GP2 DJGP2G DJGPG硅橡膠計算機電纜型號說明參數：成品電纜導體2CTC時直流電阻：應滿足GB/T3956標準要求.成品電纜導電線芯的直流電阻.換算到電纜 長度為lm.標稱截面為lmm2和溫度為20'C時.銅芯線芯應不大于0.0184Q。

成品電纜絕緣線芯的絕緣電阻：成品電纜絕緣線芯的絕緣電阻.換算到電纜長度為lkm和溫度為2度時. 導電線芯截面在50mm2及以下的應不小于50MQ , 70?185mm2的應不小于35MQ。
成品電纜應經受工頻交流試驗電壓3000V,5min試驗，絕緣無擊穿。
G硅橡膠計算機電纜交貨長度允許根據雙方協議長度交貨：長度計量誤差不超過±0.5%